View ADL5534ACPZ-WP_1207304.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Preliminary Technical Data
FEATURES
Fixed gain of 20 dB Operation up to 500 MHz +41.8 dBm OIP3 at 70 MHz Noise Figure 2.5 dB at 70 MHz Temperature and power supply stable Power supply: 5 V Power supply current: 90 mA per amplifier 1000 V ESD (Class 1C)
20 MHz to 500 MHz IF Gain Block ADL5534
FUNCTIONAL BLOCK DIAGRAM
14 GND 16 GND 15 GND 13 GND
RFIN1 1 NC 2 RFIN2 3 NC 4
12 RFOUT1
ADL5534
11 CLIN1 10 RFOUT2 9 CLIN2
Figure 1. Block Diagram
GENERAL DESCRIPTION
The ADL5534 contains two broadband, fixed-gain, linear amplifiers in an 4x4 mm LFCSP package and operates at frequencies up to 500 MHz. The device can be used in a wide variety of wired and wireless devices including cellular, GSM and WCDMA, and broadband applications. The ADL5534 has a fixed gain 20 dB and is stable over frequency, temperature, power supply and from device to device. It achieves an OIP3 of 41.8 dBm with an output compression point of +20.2 dBm and a noise figure of 2.5 dB. The ADL5534 is single-ended and internally matched to 50 with an input return loss of 10 dB. Only input/output accoupling capacitors, a power supply decoupling capacitor and external inductor are required for operation. This IF amplifier operates with supply voltage of +5V, consuming 90 mA of supply current per amplifier. Fabricated on a GaAs HBT process and has an ESD rating of 1000 V (Class 1C). The device is packaged in a 4mm x 4mm LFCSP that uses an exposed paddle for excellent thermal impedance and operates from -40C to +85C. A fully populated evaluation board is available.
Rev. PrD 5/07
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2007 Analog Devices, Inc. All rights reserved.
GND 7 GND 8
GND 5
GND 6
ADL5534 TABLE OF CONTENTS
Features .............................................................................................. 1 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 4
Preliminary Technical Data
ESD Caution...................................................................................4 Pin Configuration and Function Descriptions..............................5 Typical Performance Characteristics ..............................................6 EVALUATION BOARD ...................................................................7 OUTLINE DIMENSIONS ...............................................................9 ORDERING GUIDE.....................................................................9
REVISION HISTORY
5/07--Rev. PrD: Preliminary Version
Rev. PrD 5/07 | Page 2 of 9
Preliminary Technical Data SPECIFICATIONS
VCC = 5 V, T = 25C, unless otherwise noted. Table 1.
Parameter OVERALL FUNCTION Frequency Range Gain vs. Frequency Input Return Loss (S11) Output Return Loss (S22) Isolation (RFIN1 to RFOUT2 and RFIN2 to RFOUT1) Isolation (RFIN1 to RFOUT2 and RFIN2 to RFOUT1) FREQUENCY = 70 MHz Gain vs. Temperature Output 1 dB Compression Point Output Third-Order Intercept Noise Figure FREQUENCY = 190 MHz Gain vs. Temperature Output 1 dB Compression Point Output Third-Order Intercept Noise Figure FREQUENCY = 380 MHz Gain vs. Temperature Output 1 dB Compression Point Output Third-Order Intercept Noise Figure POWER INTERFACE Supply Voltage Supply Current vs. Temperature Power Dissipation Conditions Min 20 50 MHz. Center Frequency = 190 MHz or 380 MHz 30 MHz to 500 MHz 30 MHz to 500 MHz Frequency = 200 MHz Frequency = 500 MHz 0.15 -10 -10 -29.8 -22.5 Typ
ADL5534
Max 500
Unit MHz dB dB dB dB dB
-40C TA +85C f = 1 MHz, Output Power (POUT) = 0 dBm (per tone)
19.8 .25 20.0 41.8 2.5 19.4 .25 20.2 40.1 2.7 18.8 .25 20.1 37.0 2.9 4.75 5 90 104 450 5.25
dB dB dBm dBm dB dB dB dBm dBm dB dB dB dBm dBm dB V mA mA mW
-40C TA +85C f = 1 MHz, Output Power (POUT) = 0 dBm (per tone)
-40C TA +85C f = 1 MHz, Output Power (POUT) = 0 dBm (per tone) Pins RFOUT, Vcc Current Consumption is Specified Per Amplifier -40C TA +85C (Specified Per Amplifier) VPOS = 5V (Specified Per Amplifier)
Rev. PrD 5/07 | Page 3 of 9
ADL5534 ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Supply Voltage, VPOS Input Power Per Amplifier(re: 50 ) Internal Power Dissipation Per Amplifier (Paddle Soldered) JA (Paddle Soldered) Maximum Junction Temperature Operating Temperature Range Storage Temperature Range (Soldering 60 sec) Rating 5.5 V +12 dBm 650 mW TBD C/W 150 C -40C to +85C -65C to +150C 240C
Preliminary Technical Data
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ESD CAUTION
Rev. PrD 5/07 | Page 4 of 9
Preliminary Technical Data PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
16 GND 15 GND 14 GND 13 GND
ADL5534
RFIN1 1 NC 2 RFIN2 3 NC 4
PIN 1 INDICATOR
12 RFOUT1 11 CLIN1 10 RFOUT2 9 CLIN2
ADL5534
TOP VIEW (Not to Scale)
GND 5
Figure 2.
Table 3. Pin Function Descriptions
Pin No. 1, 3 10, 12 5, 6, 7,8, 13,14,15,16 2, 4 9, 11 Mnemonic RFIN1, RFIN2 RFOUT1, RFOUT2 GND NC CLIN1, CLIN2 Exposed Paddle Description RF Input: Requires a DC blocking capacitor. Use a 10 nF capacitor for normal operation. RF Output and Bias: DC bias is provided to this pin through an inductor. A 470 nH inductor is recommended for normal operation. RF path requires a DC blocking capacitor. Use a 10 nF capacitor for normal operation. Ground. Connect this pin to a low impedance ground plane. No Connect. A 1 nF capacitor connected between 9 and ground an Pin11 and ground provides decoupling for the on board linearizer. Internally connected to GND. Solder to a low impedance ground plane
Rev. PrD 5/07 | Page 5 of 9
GND 7
GND 6
GND 8
ADL5534 TYPICAL PERFORMANCE CHARACTERISTICS
45.0
Preliminary Technical Data
40.0
0 -2 -4
35.0 NF, GAIN,P1dB, OIP3 (dB, dBm)
30.0 ReturnLoss & Isolation (dB)
-6 -8 -10 -12 -14 -16 -18 -20 -22 -24 -26 -28
S11 dB S12 dB S22 dB
25.0
20.0
15.0
10.0
NF GAIN P1dB OIP3
5.0
0.0 0 100 200 300 Frequency (MHz) 400 500 600
-30 0 100 200 300 Freq (MHz) 400 500 600
Figure 3 ADL5534 Gain, Noise Figure, OIP3 and P1dB vs Frequency
Figure 5 ADL5534 Input / Output Return Loss and Reverse Isolation vs Frequency
48 46 44 42 40 38
OIP3 - dBm
36 34 32 30 28 26 24 22
3B_20MHz_5V 3B_70MHz_5V 3B_190MHz_5V 3B_380MHz_5V 3B_500MHz_5V
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
Pout (dBm)
Figure 4 ADL5534 OIP3 vs Pout and Frequency
Rev. PrD 5/07 | Page 6 of 9
Preliminary Technical Data EVALUATION BOARD
Figure 6 shows the schematic for the ADL5531 evaluation board. The board is powered by a single 5 V supply. The components used on the board are listed in. Table 4Applying 5V to Vpos will bias the amplifier corresponding to RFIN1 RFOUT2. Applying 5 V toVpos1 will bias the amplifier
ADL5534
corresponding to RFIN2 - RFOUT2 To bias both amplifiers from a single supply, connect 5V to Vpos or Vpos1 and attach a jumper across W3
Vpos C7 10 nF
L1 470 nH 1 uF
C9 W1 Gnd C2 10nF
RFIN1 R5 open
C1 10nF R1 open T1 C15 Open C3 10nF C12 Open
NC
NC
NC
NC
C11 Open
C13 Open
12
R2 Open R6 Open R8 Open
15
16
13
14
1 2 3 4
RFIN1
RFOUT1
C5 1 nF C16 open C6 1 nF
L2 470 nH
T2
ADT2-1T-1P
R7 ADT2-1T-1P open RFIN2 R3 open
NC
RFIN2
Z1 CLIN1 11 ADL5534 10
RFOUT2 CLIN2
NC
9
NC
NC
NC
NC
C14 Open
R4 Open
5
8
7
6
C4 10nF Vpos1 C8 10 nF C10 1 uF
W2
Vpos
W3
Vpos1
Gnd
Figure 6. Evaluation Board Schematic
Table 4. Evaluation Board Configuration Options
Component C1, C2, C3, C4 C5, C6 R1, R2, R3, R4, R5, R6, R7 R8 T1, T2 Function AC-coupling capacitors. Provides decoupling for the on board linearizer. Optional components used for Configuring ADL5534 as a balanced amplifier. T1 and T2 are 50 t o100 impedance transformers used to configure the ADL5534 as a balanced amplifier. T1 and T2 are used to present a 100 differential impedance to the ADL5534. Optional components used for Configuring ADL5534 as a balanced amplifier. Power Supply decoupling capacitors capacitor. Power Supply decoupling capacitors capacitor. DC bias inductor. Clip-on terminals for power supply. 2-pin jumper for connection of ground and supply via cable. 2-pin jumper use to connect Vpos to Vpos1 Default Value 10 nF 0402 1 nF 0603 Open 0603
MiniCircuits ADT2-1T-1P Open
C11, C12, C13, C14, C15, C16 C9, C10 C7, C8 L1, L2 VCC & GND W1,W2 W3
C11-C14: Open 0402 C15,C16: Open 0402 1 uF 0603 10 nF 0603 470 nH 1008CS VCC Red GND Black Open
Rev. PrD 5/07 | Page 7 of 9
ADL5534
Preliminary Technical Data
Figure 7. Evaluation Board Layout (Top)
Figure 8. Evaluation Board Layout (Bottom)
Rev. PrD 5/07 | Page 8 of 9
Preliminary Technical Data OUTLINE DIMENSIONS
0.50 0.40 0.30
ADL5534
4.00 BSC SQ
0.60 MAX
12 13 16
PIN 1 INDICATOR
2.65 2.50 SQ 2.35 0.25 MIN
1
PIN 1 INDICATOR
3.75 BSC SQ 0.65 BSC
TOP VIEW
9
EXPOSED PAD
8 5 4
1.95 BCS 0.80 MAX 0.65 TYP
12 MAX 1.00 0.85 0.80 SEATING PLANE
BOTTOM VIEW
COMPLIANT TO JEDEC STANDARDS MO-220-VGGC.
Figure 9. 16-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 4mm x 4 mm Body, Very Thin, Quad Lead CP-16-13 Dimensions shown in millimeters
ORDERING GUIDE
Model ADL5534ACPZ-R7 ADL5534-EVALZ
1
Temperature Range
1 1
Package Description 8-Lead LFCSP Tape and Reel 8-Lead LFCSP Wa e Pack Evaluation Board
Package Option CP-16-13 CP-16-13
Branding
031006-A
0.30 0.23 0.18
0.05 MAX 0.02 NOM COPLANARITY 0.20 REF 0.08
Ordering Quantity
-40C to +85C -40C to +85C
ADL5534ACPZ-WP
Z = Pb-free part.
(c)2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. PR06836-0-5/07(PrD)
Rev. PrD 5/07 | Page 9 of 9

▲Up To Search▲

Price & Availability of ADL5534ACPZ-WP

	To Download ADL5534ACPZ-WP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .